AirCurve 10 VAuto AutoBiPAP

ResMed AirCurve™ 10 VAuto (Auto BiPAP)

Silent and Portable
Enjoy a peaceful night with a noise level of just 27 decibels. Weighing only 1.2 kg (without humidifier), it's perfect for those who want to travel without interrupting their therapy. The ResMed AirCurve™ 10 meets all requirements for air travel.

Data Recording
Your therapy data is stored in internal memory as well as on the included SD card for up to 365 days. You can track your therapy progress directly on the device's screen, showing results such as: Number of event per hour (AHI), Usage duration, Mask seal, Average pressure (in AUTO mode)

Advanced Features for Respiratory Disorders

Individuals with respiratory disorders like COPD may experience delayed or premature changes between inhalation and exhalation during therapy. With TiControl technology, you can reduce or eliminate these disturbances. The AirCurve™ 10 VAuto is equipped with advanced pressure support features, ensuring you receive the ideal therapy even if a higher fixed pressure is needed. The device automatically adjusts IPAP (inhalation) and EPAP (exhalation) pressures when it detects breathing outside prescribed settings, minimizing sleep disturbances.

Intuitive and Easy-to-Use Menu
The AirCurve™ 10 VAuto allows you to customize settings for maximum comfort during sleep, with options such as:

• Ramp Time: Starts with a minimum set pressure for up to 45 minutes to help you fall asleep comfortably, gradually increasing pressure to the prescribed level.
• SmartStart™: Begins therapy as soon as you breathe into the mask, without needing to press a physical button. The device automatically stops a few seconds after you remove the mask.
• Humidity Level (with optional heated humidifier HumidAir™): Choose between settings 1 (low humidity) and 8 (maximum humidity), or turn it off completely to find your optimal comfort level.
• Pre-Heating (with optional heated humidifier HumidAir™): Ensures the water is warm when you start therapy.
• Mask Seal Check: Verify if your mask is fitted correctly. A green smiley face indicates a good fit, while a red frown means you should readjust the mask.
• Mask Type: Select from pillow, full face, nasal, or pediatric masks to tailor the device’s algorithms accordingly.
• Hose Type: Choose between the included SlimLine™ 15 mm hose, a standard 22 mm hose, or a 3-meter hose.

OPTIONAL Continuous Humidification (Click Here) - Enhance comfort throughout the night with the HumidAir heated humidifier, which gently humidifies and warms the air provided by the device.

OPTIONAL Heated Hose (Click Here) - Add the ClimateLineAir heated hose to experience Climate Control Auto technology, providing maximum comfort by automatically adjusting the humidifier and hose temperature based on ambient conditions.

Package contains: AirCurve™ 10 device, side cover, carrying bag, SlimLine™ air hose, SD card, power cable and adapter, user manual.
Warranty: 24 months
Free therapy setup adjustment according to the prescription provided by your specialist.

Technical specifications:

• Modes: CPAP, S, VAuto
• CPAP Pressure Range: 4 - 20 cmH2O
• BiPAP S Pressure Range: 2 - 25 cmH2O
• VAuto Pressure Range: 4 - 25 cmH2O
• Dimensions: 11,6 cm (H) x 25,5 cm (W) x 15 cm (D)
• Weight: 1,248 kg
• AC Power: 100-240V, 50-60Hz 1.0-1.5A, Clasa II
• DC Power: 24V - 3.75A
• Average consumption: 53W (Without humidifier)
• Operating temperature: +5°C - +35°C, sea level up to 2591 m altitude
• Water tank capacity: 380 mL

Importance of Humidification in CPAP/APAP/BiPAP Devices
For most patients using a CPAP device, humidified air is essential for achieving good sleep during therapy. Using a heated humidifier can help eliminate potential side effects like dry throat and mouth, nasal congestion, upper airway irritation, or even nosebleeds. This device keeps the air warm, moist, and comfortable. Adjustable settings enhance the experience, allowing each user to personalize their sleep apnea therapy, resulting in feeling more rested and energized.